ALIŞVERİŞ SEPETİ
Sepetiniz boş
AMS Neve 2264ALB Mono Limiter/Compressor modülü
Levels: | |
Input: | 10kΩ, bridging, balanced and earth-free. |
Output: | Source impedance 80Ω, balanced and earth-free. Maximum output: +26dB into 600Ω |
Gain: | 0dB |
Noise: | -70.5dBu (20Hz ~ 20kHz) for linear and limit modes. |
Frequency Response: | Flat, within 1dB from 20Hz ~ 20kHz |
Distortion: | With limit switched IN, threshold set to +4dBu, recovery 800ms & input level +20dB:0.05% @ 1kHz (10Hz ~ 80kHz)With Compress & Limit switched OUT, input/output level +9dB: 0.05% @ 1kHz (10Hz ~ 80kHz) |
Limiter section: | |
Threshold: | Variable from +4dB ~ +15dB |
Ratio: | Greater than 100:1 |
Attack Time: | 4mS |
Recovery Time: | 50ms, 100ms, 200ms, 800ms and Auto1 (100ms/2sec) and Auto2 (50ms/5sec) settings |
Compressor section: | |
Threshold: | Variable from -20dBu ~ +10dBu |
Ratio: | 1.5:1, 2:1, 3:1, 4:1, 6:1 |
Attack Time: | 3ms with Slow Attack off, 12ms with Slow Attack active. |
Recovery Time: | 100ms, 400ms, 800ms, 1.5sec and Auto1 (100ms/2sec) and Auto2 (50ms/5sec) settings. |
Gain Make-up: | 0dB ~ +20dB extra gain when Compress switched IN. |
Meter: | Digital LED meter with approximate PPM ballistics indicates 0dB ~ 20dB of gain reduction. |
Controls: | |
Front Panel Controls: | Gain meter, Limiter Threshold & Recovery rotary controls with IN/OUT switch & indicator LED, Compressor Threshold and Recovery rotary controls with IN/OUT switch & indicator LED, Compressor Gain and Ratio rotary controls with LINK switch & indicator LED, Bypass switch, Signal Presence indicator LED, Slow Attack switch. |
Dimensions: | |
Width x Height x Depth & Weight:(excluding front panel controls and rear connector) | 38mm (1½ inches) x 132mm (5¼ inches) x 145 mm (5¾ inches) – 1.1kg (2½ pounds) |
2264ALB Module requirements: | |
Rack: | Compliant LunchboxTM rack with integral PSU and external audio connections. |
Available Rack slots: | Single LunchboxTM rack slot required for each 2264ALB module.Two or three adjacent LunchboxTM rack slots required for each 1073LB/2264ALB or 1073LB/ 1073LBEQ/2264ALB module configuration when the modules are used together in Audio Processing Insert mode. |