D.a.s Audio Aero-12A 12 İnç 600 Watt Aktif Line Array Hoparlör
D.a.s Audio Aero-12A 12 İnç 600 Watt Aktif Line Array Hoparlör
63 Hz/20 kHz - Huş Ağacı 500W. MF + 100W. HF Amplifier
- Powered two-way, mid-high line array module
- Two channel amplifier 500 W LF+ 100 W HF 3rd generation Class D
- One 12″ loudspeaker with neodymium magnetic assembly
- M-75N Neodymium compression driver with 1.5″ exit
- SERPIS high frequency plane wave generator
- Captive rigging system integrated in the cabinet design
The Aero 12A compact line array system joins the Aero Series2 family
of professional sound touring products. The system incorporates an
impressive battery of high tech features that take compact line array
systems to an unprecedented level of performance.
The two-way amplifier design of the Aero 12A sets a new industry
benchmark in audio performance, efficiency and power density. The 600 W
amplifier provides extended bandwidth, improved dynamic range and
exceptionally low distortion. Impressively compact in size and light in
weight, its high power density of over 20 W per cubic inch promotes an
amplifier design that requires much less space, reducing the overall
cabinet size and in turn, the total cabinet weight-an important
attribute for flown systems. Signal processing is accomplished by way of
a powerful 24 bit DSP providing unparalleled control over critical
signal parameters. Digital Finite Impulse Response (FIR) filters are
used in the signal processing of the Aero 12A.
The Aero 12A incorporates a D.A.S. 12LN4C, 12″ low frequency
transducer employing a 75 mm (3″) voice coil and neodymium magnet motor
assembly. High frequency reproduction relies on the exceptional
characteristics of the new D.A.S. M-75N neodymium compression driver
designed for use in applications where high SPL and low distortion are
required. A pure titanium diaphragm featuring a 75 mm copper-clad,
aluminium flat-wire voice coil yields high sensitivity, low distortion
and extended frequency response.
The easily portable and rugged enclosure is manufactured using birch
plywood and finished with a durable black paint. The captive rigging
system splay angles range from 0º to 10º and can be adjusted in 0.5º
increments from 0º to 3º and 1º increments from 3º to 10 º allowing a
wide range of column curvatures to be accomplished.
| Technical Data |
|
|---|---|
| Nominal HF Amplifier Power | 100 W |
| Nominal MF Amplifier Power | 500 W |
| Frequency Range (-10 dB) | 63 Hz-20 kHz |
| Rated Peak SPL at 1 m | 134 dB |
| Horizontal Coverage (-6 dB) | 90º Nominal |
| Vertical Coverage | Splay Dependent |
| Enclosure Material | Birch Plywood |
| Color/Finish | Black/Paint |
| Connectors | Input: Female XLR Loop Thru: Male XLR AC Input: powerCON AC Output: powerCON |
| AC Requirements | 115 V, 50 Hz/60 Hz 230 V, 50 Hz/60 Hz |
| Current Draw (1/3 power @ 230 V) | 1.7A |
| Dimensions (H x W x D) | 31.6 x 68.8 x 38.5 cm 12.4 x 27 x 15.2 in |
| Weight | 27 kg (59.4 lb) |