Line 6 Vetta II Combo Gitar Amfisi 300 Watt

Line 6 Vetta II Combo Gitar Amfisi 300 Watt

• 73 classic and modern amps and 27 speaker cabs
• Over 80 Effects with Two Amps at Once
• Stereo XLR balanced +4dBu direct outputs and 1/4-inch unbalanced 10dBV direct outs
• AES/EBU and S/PDIF digital audio ins and outs
• Save Variax Settings

Two Amps at Once

One of the revolutionary features of Vetta II is its ability to provide two totally independent amp models at the same time. You have complete control over where they’re placed in the stereo field. You can pick any two amps and pan them hard left and hard right, send one amp to a Vetta external cab, or layer them right on top of each other. Just about anything you can think up, Vetta II can do it. For an even bigger sound, kick on the Double Tracker and now it sounds like you’re in the studio "double tracking" your guitar part. Once you experience two amps at once, you may have a hard time going back to just one. We did. Now, take a look at the over 70 amps you can double-up and party with.

Effects and the Kitchen Sink:

From dirty stompbox distortion to studio-quality reverb lushness, Vetta II gives you models of the greatest effects in guitar history. Vetta II gives you the ability to have ALL of these effects on at the same time: Any three of 53 stompbox models, a wah pedal, a volume pedal, a noise gate, a studio-grade compressor, two types of tremolo, graphic or parametric post EQ, a choice of 21 modulation effects, a choice of 14 delay effects, and any one of 16 different reverb types.

But, what fun are a bunch of effects if you can’t hook them up in strange ways? Well, Vetta II has more routing options than even we can keep track of. You can even LOCK all of Vetta II’s modulation and delay effects to the Tap Tempo function. Now you can change the tempo of multiple delays, plus chorus and tremolo speeds all with a single FBV footswitch. But that’s not all. Here’s a quick start guide to some of Vetta II’s routing madness.

Stompboxes :Vetta II gives you any three of 53 stompboxes to go mad with at once. They can all be different, they can all be the same, and they can be "wired" in any configuration you please, into either or both amps. What if you put a delay into a flanger and then into a fuzz? How about three different kinds of delay? Be different. We dare ya!

In-Line Effects :The Tremolo, Gate, Comp(ressor) and EQ buttons make up the In-Line effects group. Gate comes before all of the stompboxes while the rest come right after the amp/cab.

Routable Post Effects:The Loop, Pitch Shift, Mod, Delay, and Reverb are all part of the post studio-type effects. Just like the stompboxes always stay before the amp, these effects are always after the amp/cab. You can change the order of the post effects, the signal flow (series, parallel or chain) and even their physical output assignment. If this is the stuff you crave, Vetta II’s manual is practically a history lesson on how effects routing works.

Digital/Analog Effects Loop

While we’ve tried to anticipate all of your effects needs, you may still want to use other effects with Vetta II. Just like any normal guitar amp, you can run your old stompboxes right in front of Vetta II. If you’ve got rack gear, you can use the analog (1/4-inch TRS) or digital (S/PDIF or AES/EBU) connections on Vetta II’s back panel. The Effects Loop is switchable (from the front panel or the FBV controller), the on/off state is remembered in each preset, and you can even route the loop in series or parallel.

A.I.R. II

Vetta II is the most versatile recording amplifier in the world. The direct outputs of Vetta II include Line 6’s A.I.R. II microphone and cabinet technology. A.I.R. II allows you to choose from 3 different classic mic models, each in two different positions. The mic settings can also be saved into each preset of Vetta II.

Ins and Outs

Vetta II has every type of connection for a guitarist living in the modern world. Vetta II’s back panel includes stereo XLR balanced +4dBu direct outputs (with ground lift switch), stereo 1/4-inch unbalanced –10dBV direct outs, 1/4-inch stereo effects loop, Variax digital guitar input, AES/EBU and S/PDIF digital audio ins and outs (up to 24-bit/96k), Left and Right speaker outputs, MIDI in and out, and an FBV-class pedal jack.

Variax and Vetta II

Vetta II includes an ultra-rugged, locking Variax cable that is used to connect a Line 6 Variax Guitar (sold seperately) to Vetta II. This one cable (based on industry-standard CAT 5 Ethernet) provides everything needed to make the most complete guitar system ever created. The Vetta II now provides power, a direct digital audio connection, and bi-directional control of the Variax.

Each Vetta II preset can store the guitar model, pickup selection and exact position of the tone control. Plus, Vetta II can send the signal to the speakers, to the direct XLR and 1/4-inch outputs, or both. What does all of this mean? Now you can instantly switch from a single-coil guitar in the neck position with a fuzz and tape echo running into a head and 4x12 cabinet, to a carefully miked acoustic coming through just the P.A. system. Now imagine what you could do at your next session or gig!

Customtone.com

Vetta II is Custom Tone Ready. CustomTone.com is our online library of Tone exclusively for Line 6 products. Line 6 has made a unique investment by professionally programming thousands of Tones matched to the signature sounds of some of the greatest guitarists, bands, songs and guitar gear of all time, and making all that Tone available to you for free at CustomTone.com. There's also a User library where you can submit your own Tones and grab Tones created by Line 6 users around the world.